How to track rental property maintenance
Keep one record per property with four things in it: a list of its systems and equipment with their ages, every repair filed against the thing that was repaired, the documents themselves, and a schedule of what is due next. Here is how to set that up.
1. List each property’s systems and equipment
Start with an inventory. For each property, and each unit in it, write down the things that cost real money to repair or replace:
- Heating and cooling: furnace, air conditioner, heat pump, thermostat
- Water and plumbing: water heater, sump pump, main shutoff
- Roof, gutters, siding and windows
- Electrical panel
- Appliances: refrigerator, range, dishwasher, washer and dryer
- Safety: smoke and carbon monoxide detectors
For each one, note the make and model, where it is, and when it was installed. The installation year matters most, because age is the best single predictor of what will fail next. A recent inspection report usually lists all of this, so start there if you have one.
2. Record every repair against the thing that was repaired
A list of expenses by date tells you what you spent. It does not tell you that the same water heater has been repaired three times in two years. Keep each repair with the asset it was for, and record:
- The date
- What was done
- Who did it
- What it cost
- The invoice or receipt
With that, the question “repair it again or replace it?” has an answer: you can see the age, the number of repairs and the total spent.
3. Keep the documents with the property, not in your inbox
The documents worth keeping for a rental are:
- The inspection report from when you bought it, and any since
- Invoices, receipts and quotes for repairs and improvements
- Warranties and manuals
- Service agreements, such as lawn care, pest control or HVAC maintenance
- Leases
- Insurance policies, property tax bills and permits
Wherever you keep them, organize by property first, then by what the document relates to: the furnace, the roof, Unit 2. Photograph paper documents the day you get them. The test is simple: when a contractor asks when the roof was last replaced, can you find the answer in under a minute?
4. Put routine maintenance on a schedule
Most expensive failures are preceded by skipped maintenance. Give each asset a service interval and a next due date. Common ones:
- Furnace filters: every one to three months
- Furnace and air conditioner service: once a year
- Water heater flush: once a year
- Gutters: twice a year
- Smoke and carbon monoxide detectors: test regularly and replace on the manufacturer’s schedule
Intervals vary with the equipment and the climate, so follow the manufacturer’s guidance where you have it.
5. Look ahead to replacements
Every system has a typical lifespan. Compare each asset’s age with it and you get a list of what is likely to need replacing in the next few years. That turns a surprise bill into a planned one, and lets you get quotes before something fails in January.
Which tool to use
A spreadsheet with one tab per property and a folder of scanned documents will do all of the above, if you keep it up. The hard part is the upkeep: every invoice has to be typed in and filed by hand, and nothing reminds you that the water heater is eleven years old.
Property Master does the same job from the documents themselves. Upload a property’s inspection report and it adds the systems and equipment. Upload an invoice, as a PDF or a photo, and it reads the date, vendor, amount and work done, and files it under the right property, asset and vendor. Each asset gets a service schedule, an expected lifespan and a health score from 0 to 100, and the dashboard shows what needs attention next.
Common questions
What is the best way to track rental property maintenance?
Keep a record per asset, not per expense. List each property’s systems and equipment with their installation dates, record every repair against the asset it was for with the date, vendor, cost and invoice, and give each asset a service schedule. You can do this in a spreadsheet, or with software such as Property Master that builds the record from your documents.
What maintenance records should a landlord keep?
Inspection reports, invoices and receipts for every repair and improvement, quotes, warranties, service agreements, and a note of when each major system was installed. Keep them for as long as you own the property. They are useful for repair decisions, for insurance claims and when you sell. Ask your accountant how long to keep records for tax purposes.
How do I organize property documents?
By property first, then by what each document relates to: a system, a unit or a vendor. Store a digital copy of everything, and name or tag each file so you can find it from the thing it is about.